您的位置：首页->EASE轴承规格及技术参数->EASE EASE-轴承持久， 准确的， 稳定的，可靠，经济。轴承规格参数详细页面

EASE EASE-轴承持久， 准确的， 稳定的，可靠，经济。轴承规格参数详细介绍

轴径 轴承型号 内径 外径 全长
标准型 调整型（AJ型）
 d          
           
           
           
           
           
           
           
           
           
           
           

　EASE轴承名称由来： Enduring 持久的，耐久的 Accurate 准确的，精确的 Stable 稳定的，可靠的 Economical 经济的，节约的 　　EASE成立时间：1968年8月　　EASE资本：5亿日元 　　EASE总部所在地：日本大阪 　　日本EASE精工株式会社出品的直线轴承工厂用户首选，EASE精工株式会社是继THK、IKO之后又一专业的直线球轴承制造厂商。产品素以精密耐用、稳定经济著称，与IKO、THK可互相替代。

構造図
種類

Standard type

Adjustable type

Open type
画像 画像 画像

This is the most widely used
type with three different
dimension series as below.
For normal applications,
High-grade(H) is available.
Precision-grade(P) is also
available for high precision
applications.






※Dustproof, sealed retainers available.

The outer race has a slot in
axial direction.
This design allows an easy
clearance adjustment with
the shaft together with
a housing which has
adjustable inside dimeter.
The basic dimensions are
the same as of the
respective series of
standard type.
This type is described with
the suffix "AJ" as below.

※Dustproof, sealed retainers available.

The outer race is cut off open
by one ball track
(50°to 80°).
This opening slot allows an
application for a shaft with
supports to prevent its
deflection.
Clearance can also be
adjusted easily.
This type is described with
the suffix "OP" as below.



※Dustproof, sealed retainers available.

Original series of EASE in metric dimension. Most widely used in Japan

SDM （Steel Retainer）
寸法表Size Table

SDM AJ （Steel Retainer）
寸法表Size Table

SDM OP （Steel Retainer）
寸法表Size Table

SDM-Y （Plastic Retainer）
寸法表Size Table

SDM-Y AJ (Plastic Retainer)
寸法表Size Table

Most widely used series in Europe in metric dimension

SDE （Steel Retainer）
寸法表Size Table

SDE AJ （Steel Retainer）
寸法表Size Table

SDE OP （Steel Retainer）
寸法表Size Table

SDE-Y （Plastic Retainer）
寸法表Size Table

SDE-Y AJ (Plastic Retainer)
寸法表Size Table

Most widely used series in USA in inch dimension

SDB （Steel Retainer）
寸法表Size Table

SDB AJ （Steel Retainer）
寸法表Size Table

SDB OP （Steel Retainer）
寸法表Size Table

Round Flanged type

Square Flanged type
画像 画像

A round mounting flange is
equipped on one end of the
standard type bearing as
part of the outer race.
This design can shorten
mounting time,offers
compact machine design
and provides high cost
efficiency.This type is
described as below.

This type is equipped with
a mounting flange which
has been made square from
the round flange of SDMF
type by cutting off its
edges on four sides.
This design can lower
the mounting center height
and enables light and
compact machine design.
This type is described as
below.

SDMF （Steel Retainer）
寸法表Size Table

SDMK （Steel Retainer）
寸法表Size Table

SDMF-Y （Plastic Retainer）
寸法表Size Table

SDMK-Y （Plastic Retainer）
寸法表Size Table

Long type

Long type with Round Flange

Long type with Square Flange
画像 画像 画像

Two ball retainers of a
standard type bearing are
incorporated in this type.
Therefore,it can carry large
load as well as moment load.
Suffix"L" indicates
Long type,as below.

This has the combination
of a long type bearing and
a round mounting flange.
This provides easy mounting
and can carry moment load.
This type is described as
below.

This has the combination of
a long type bearing and a
square mounting flange.
This provides
lower center height for
mounting,light and compact
machine design and can
carry moment load.
This type is descrived as
below.

SDM-LY （Standard）
寸法表Size Table

SDMF-LY (Standard)
寸法表Size Table

SDMK-LY (Standard)
寸法表Size Table

 

 

 

 

 

　 上海川代轴承机械有限公司代理EASE 　 　 　 　 　 　 　 　 EASE SDE35 OP SDM80 OP SDMF16UU SDB32 SDM25Y SDM40LYUU SDMK6Y SDE8 SDM20YUU SDM6Y SDM30OP
EASE SDM6 SDE8Y SDMF20 SDE30LYUU SDMK25UU SDB48 OP SDMF30LY SDM60AJ SDE50AJ SDM50OP SDM80 EASE SDE40 OP SDM100 OP SDMF16AUU SDB40 SDM30Y SDMF6Y SDMK8Y SDE10 SDM25OP SDM6YUU SDM30Y
EASE SDM8S SDE10Y SDMF25 SDE35LYUU SDMK30UU SDB64 OP SDMF35LY SDM80AJ SDE60AJ SDM60 SDM80AJ EASE SDE50 OP SDM120 OP SDMF20UU SDB48 SDM35Y SDMF8Y SDMK10Y SDE12 SDM25Y SDM8SY SDM30YAJ
EASE SDM8 SDE12Y SDMF30 SDE40LYUU SDMK35UU SDM6YAJ SDMF40LY SDM100AJ SDE80AJ SDM60AJ SDM80OP EASE SDE60 OP SDE8YAJ SDMF25UU SDB64 SDM38Y SDMF10Y SDMK12Y SDE13 SDM25YAJ SDM8Y SDM30YUU
EASE SDM10 SDE13Y SDMF30A SDMK6 SDMK40UU SDM8SYAJ SDMF6YUU SDM120AJ SDM6Y SDM60OP SDM100 EASE SDE80 OP SDE10YAJ SDMF30UU SDMK6UU SDM40Y SDMF12Y SDMK13Y SDE16 SDM25YUU SDM8YUU SDM35OP
EASE SDM12 SDE16Y SDMF35 SDMK8 SDMK50UU SDM8YAJ SDMF8YUU SDMK35YUU SDM6YUU SDM80 SDM100AJ EASE SDM6AJ SDE12YAJ SDMF30AUU SDMK8UU SDB8 OP SDMF13Y SDMK16Y SDE20 SDM30OP SDM10Y SDM35Y
EASE SDM13 SDE20Y SDMF40 SDMK10 SDMK60UU SDM10YAJ SDMF10YUU SDMK40YUU SDM8SY SDM80AJ SDM100OP EASE SDM8SAJ SDE13YAJ SDMF35UU SDMK10UU SDB10 OP SDMF16Y SDMK20Y SDE25 SDM30Y SDM10YUU SDM35YAJ
EASE SDM16 SDE25Y SDMF50 SDMK12 SDMK80UU SDM12YAJ SDMF12YUU SDMK6LYUU SDM8Y SDM80OP SDMF6UU EASE SDM8AJ SDE16YAJ SDMF40UU SDMK12UU SDB12 OP SDMF20Y SDMK25Y SDE30 SDM30YAJ SDM12OP SDM35YUU
EASE SDM20 SDE30Y SDMF60 SDMK13 SDB8AJ SDM13YAJ SDMF13YUU SDMK8LYUU SDM8YUU SDM100 SDMF8UU EASE SDM10AJ SDE20YAJ SDMF50UU SDMK13UU SDB16 OP SDMF25Y SDMK30Y SDE35 SDM30YUU SDM12Y SDM38
EASE SDM25 SDE35Y SDMF80 SDMK16 SDB10AJ SDM16YAJ SDMF16YUU SDMF16 SDM10Y SDM100AJ SDMF10UU EASE SDM12AJ SDE25YAJ SDMF60UU SDMK16UU SDB20 OP SDMF30Y SDMK35Y SDE40 SDM35OP SDM12YAJ SDM38AJ
EASE SDM30 SDE40Y SDE8LY SDMK20 SDB12AJ SDM20YAJ SDMF20YUU SDMF16A SDM10YUU SDM100OP SDMF12UU EASE SDM13AJ SDE30YAJ SDMF80UU SDMK20UU SDB24 OP SDMF35Y SDMK40Y SDE50 SDM35Y SDM12YUU SDM38OP
EASE SDM35 SDM6 SDE10LY SDMK25 SDB16AJ SDM25YAJ SDMF25YUU SDMK6YUU SDM12OP SDMF6UU SDMF13UU EASE SDM16AJ SDE35YAJ SDE8LYUU SDMK8YUU SDB32 OP SDMF40Y SDMK6LY SDE60 SDM35YAJ SDM13OP SDM38YUU
EASE SDM38 SDM8S SDE12LY SDMK30 SDB20AJ SDM30YAJ SDMF30YUU SDMK35LYUU SDM12Y SDMF8UU SDMF16TUU EASE SDM20AJ SDE40YAJ SDE10LYUU SDMK10YUU SDB40 OP SDMF6LY SDMK8LY SDE80 SDM35YUU SDM13Y SDM40OP
EASE SDM40 SDM8 SDE13LY SDMK35 SDB24AJ SDM35YAJ SDMF35YUU SDMK40LYUU SDM12YAJ SDMF10UU SDMF16UU EASE SDM25AJ SDMF6 SDE12LYUU SDMK12YUU SDMK10LYUU SDMF8LY SDMK10LY SDE8AJ SDM38 SDM13YAJ SDM40Y
EASE SDM50 SDM10 OP SDE16LY SDMK40 SDB32AJ SDM38YAJ SDMF40YUU SDM6LY SDM12YUU SDMF12UU SDMF20UU EASE SDM30AJ SDMF8 SDE13LYUU SDMK13YUU SDMK12LYUU SDMF10LY SDMK12LY SDE10AJ SDM38AJ SDM13YUU SDM40YAJ
EASE SDM60 SDM12 OP SDE20LY SDMK50 SDB40AJ SDM40YAJ SDMF6LYUU SDM8LY SDM13OP SDMF13UU SDMF25UU EASE SDM35AJ SDMF10 SDE16LYUU SDMK16YUU SDMK13LYUU SDMF12LY SDMK13LY SDE12AJ SDM38OP SDM16OP SDM40YUU
EASE SDM80 SDM13 OP SDE25LY SDMK60 SDB48AJ SDM6LYUU SDMF8LYUU SDM10LY SDM13Y SDMF16TUU SDMF30UU EASE SDM38AJ SDMF10A SDE20LYUU SDMK20YUU SDMK16LYUU SDMF13LY SDMK16LY SDE13AJ SDM38YUU SDM16YAJ SDM50
EASE SDM100 SDM16 OP SDE30LY SDMK80 SDB64AJ SDM8LYUU SDMF10LYUU SDM12LY SDM13YAJ SDMF16UU SDMF35UU EASE SDM40AJ SDMF12 SDE25LYUU SDMK25YUU SDMK20LYUU SDMF16LY SDMK20LY SDE16AJ SDM40OP SDM16YAJ SDM50AJ
EASE SDM120 SDM20 OP SDE35LY SDB4 SDM6Y SDM10LYUU SDMF12LYUU SDM13LY SDM13YUU SDMF20UU SDMF40UU EASE SDM50AJ SDMF13  SDMK30YUU SDMK25LYUU SDMF20LY SDMK25LY SDE20AJ SDM40Y SDM16YUU SDM50OP
EASE SDE10 OP SDM25 OP SDE40LY SDB6 SDM8SY SDM12LYUU SDMF13LYUU SDM16LY SDM16OP SDMF25UU SDMF50UU EASE      SDMF25LY SDMK30LY SDE25AJ SDM40YAJ SDM20OP SDM60
EASE SDE12 OP SDM30 OP SDMF6UU SDB8 SDM8Y SDM13LYUU SDMF16LYUU SDM20LY SDM16YAJ SDMF30UU SDMF60UU 　       SDMK35LY SDE30AJ SDM40YUU SDM20Y SDM60AJ
EASE SDE13 OP SDM35 OP SDMF8UU SDB10 SDM10Y SDM16LYUU SDMF20LYUU SDM25LY SDM16YAJ SDMF35UU SDMF80UU 　       SDMK40LY SDE35AJ SDM50 SDM20YAJ SDM60OP
EASE SDE16 OP SDM38 OP SDMF10UU SDB12 SDM12Y SDM20LYUU SDMF25LYUU SDM30LY SDM16YUU SDMF40UU SDM25OP 　 　 　 　 　 　 　 　 SDE40AJ SDM50AJ SDM20YUU 　

EASE轴承标准型直线轴承 [钢保持架 树脂保持架] 应用广泛，精度高。
SDM6,SDM8,SDM10,SDM12,SDM13,SDM16,SDM20,SDM25,SDM30,SDM35,SDM38,SDM40,SDM50,SDM60,SDM80,SDM100

EASE轴承标准加长型直线轴承 含两个标准的保持架,适用于冲击载荷的场合。
SDM6LY-UU，SDM8LY-UU，SDM10LY-UU，SDM12LY-UU，SDM13LY-UU，SDM16LY-UU，SDM20LY-UU，SDM25LY-UU，SDM30LY-UU，SDM35LY-UU，SDM40LY-UU

EASE轴承开口型直线轴承 外圈有一个相当于一列钢珠球回路宽度的开口（50~80°）。
SDM6-AJ，SDM8-AJ，SDM10-AJ，SDM12-AJ，SDM13-AJ，SDM16-Ajw，SDM20-AJ，SDM25-AJ，SDM30-AJ，SDM35-AJ，SDM38-AJ，SDM40-AJ，SDM50-AJ，SDM60-AJ，SDM80-AJ，SDM100-AJ

EASE轴承可调整型直线轴承 外套筒轴向开槽，方便调整轴承与轴之间的间隙。
SDM10-OP，SDM12-OP，SDM13-OP，SDM16-OP，SDM20-OP，SDM25-OP，SDM30-OP，SDM35-OP，SDM38-OP，SDM40-OP，SDM50-OP，SDM60-OP，SDM80-OP，SDM100-OP

EASE轴承圆法兰型直线轴承 [钢保持架 树脂保持架]
SDMF6Y-UU，SDMF8Y-UU，SDMF10Y-UU，SDMF12Y-UU，SDMF13Y-UU，SDMF16Y-UU，SDMF20Y-UU，SDMF25Y-UU，SDMF30Y-UU，SDMF35Y-UU，SDMF40Y-UU，SDMF50-UU，SDMF60-UU，SDMF80-UU

EASE轴承方法兰型直线轴承
SDMK6Y-UU，SDMK8Y-UU，SDMK10Y-UU，SDMK12Y-UU，SDMK13Y-UU，SDMK16Y-UU，SDMK20Y-UU，SDMK25Y-UU，SDMK30Y-UU，SDMK35Y-UU，SDMK40Y-UU，SDMK50-UU，SDMK60-UU，SDMK80-UU

EASE轴承圆法兰加长型直线轴承
SDMF6LY-UU，SDMF8LY-UU，SDMF10LY-UU，SDMF12LY-UU，SDMF13LY-UU，SDMF16LY-UU，SDMF20LY-UU，SDMF25LY-UU，SDMF30LY-UU，SDMF35LY-UU，SDMF40LY-UU

EASE轴承方法兰加长型直线轴承
SDMK6LY-UU，SDMK8LY-UU，SDMK10LY-UU，SDMK12LY-UU，SDMK13LY-UU，SDMK16LY-UU，SDMK20LY-UU，SDMK25LY-UU，SDMK30LY-UU，SDMK35LY-UU，SDMK40LY-UU

EASE SDM6 EASE SDM8S EASE SDM8 EASE SDM10 EASE SDM12 EASE SDM13 EASE SDM16 EASE SDM20 EASE SDM25 EASE SDM30 EASE SDM35 EASE SDM38 EASE SDM40 EASE SDM50 EASE SDM60 EASE SDM80 EASE SDM100 EASE SDM120 EASE SDE10 OP EASE SDE12 OP EASE SDE13 OP EASE SDE16 OP EASE SDE20 OP EASE SDE25 OP EASE SDE30 OP EASE SDE35 OP EASE SDE40 OP EASE SDE50 OP EASE SDE60 OP EASE SDE80 OP EASE SDM6AJ EASE SDM8SAJ EASE SDM8AJ EASE SDM10AJ EASE SDM12AJ EASE SDM13AJ EASE SDM16AJ EASE SDM20AJ EASE SDM25AJ EASE SDM30AJ EASE SDM35AJ EASE SDM38AJ EASE SDM40AJ EASE SDM50AJ EASE SDM60AJ EASE SDM80AJ EASE SDM100AJ EASE SDM120AJ EASE SDE8Y EASE SDE10Y EASE SDE12Y EASE SDE13Y EASE SDE16Y EASE SDE20Y EASE SDE25Y EASE SDE30Y EASE SDE35Y EASE SDE40Y EASE SDM6 EASE SDM8S EASE SDM8 EASE SDM10 OP EASE SDM12 OP EASE SDM13 OP EASE SDM16 OP EASE SDM20 OP EASE SDM25 OP EASE SDM30 OP EASE SDM35 OP EASE SDM38 OP EASE SDM40 OP EASE SDM50 OP EASE SDM60 OP EASE SDM80 OP EASE SDM100 OP EASE SDM120 OP EASE SDE8YAJ EASE SDE10YAJ EASE SDE12YAJ EASE SDE13YAJ EASE SDE16YAJ EASE SDE20YAJ EASE SDE25YAJ EASE SDE30YAJ EASE SDE35YAJ EASE SDE40YAJ EASE SDMF6 EASE SDMF8 EASE SDMF10 EASE SDMF10A EASE SDMF12 EASE SDMF13 EASE SDMF16 EASE SDMF16A EASE SDMF20 EASE SDMF25 EASE SDMF30 EASE SDMF30A EASE SDMF35 EASE SDMF40 EASE SDMF50 EASE SDMF60 EASE SDMF80 EASE SDE8LY EASE SDE10LY EASE SDE12LY EASE SDE13LY EASE SDE16LY EASE SDE20LY EASE SDE25LY EASE SDE30LY EASE SDE35LY EASE SDE40LY EASE SDMF6UU EASE SDMF8UU EASE SDMF10UU EASE SDMF10AUU EASE SDMF12UU EASE SDMF13UU EASE SDMF16UU EASE SDMF16AUU EASE SDMF20UU EASE SDMF25UU EASE SDMF30UU EASE SDMF30AUU EASE SDMF35UU EASE SDMF40UU EASE SDMF50UU EASE SDMF60UU EASE SDMF80UU EASE SDE8LYUU EASE SDE10LYUU EASE SDE12LYUU EASE SDE13LYUU EASE SDE16LYUU EASE SDE20LYUU EASE SDE25LYUU EASE SDE30LYUU EASE SDE35LYUU EASE SDE40LYUU EASE SDMK6 EASE SDMK8 EASE SDMK10 EASE SDMK12 EASE SDMK13 EASE SDMK16 EASE SDMK20 EASE SDMK25 EASE SDMK30 EASE SDMK35 EASE SDMK40 EASE SDMK50 EASE SDMK60 EASE SDMK80 EASE SDB4 EASE SDB6 EASE SDB8 EASE SDB10 EASE SDB12 EASE SDB16 EASE SDB20 EASE SDB24 EASE SDB32 EASE SDB40 EASE SDB48 EASE SDB64 EASE SDMK6UU EASE SDMK8UU EASE SDMK10UU EASE SDMK12UU EASE SDMK13UU EASE SDMK16UU EASE SDMK20UU EASE SDMK25UU EASE SDMK30UU EASE SDMK35UU EASE SDMK40UU EASE SDMK50UU EASE SDMK60UU EASE SDMK80UU EASE SDB8AJ EASE SDB10AJ EASE SDB12AJ EASE SDB16AJ EASE SDB20AJ EASE SDB24AJ EASE SDB32AJ EASE SDB40AJ EASE SDB48AJ EASE SDB64AJ EASE SDM6Y EASE SDM8SY EASE SDM8Y EASE SDM10Y EASE SDM12Y EASE SDM13Y EASE SDM16Y EASE SDM20Y EASE SDM25Y EASE SDM30Y EASE SDM35Y EASE SDM38Y EASE SDM40Y EASE SDB8 OP EASE SDB10 OP EASE SDB12 OP EASE SDB16 OP EASE SDB20 OP EASE SDB24 OP EASE SDB32 OP EASE SDB40 OP EASE SDB48 OP EASE SDB64 OP EASE SDM6YAJ EASE SDM8SYAJ EASE SDM8YAJ EASE SDM10YAJ EASE SDM12YAJ EASE SDM13YAJ EASE SDM16YAJ EASE SDM20YAJ EASE SDM25YAJ EASE SDM30YAJ EASE SDM35YAJ EASE SDM38YAJ EASE SDM40YAJ EASE SDM6LYUU EASE SDM8LYUU EASE SDM10LYUU EASE SDM12LYUU EASE SDM13LYUU EASE SDM16LYUU EASE SDM20LYUU EASE SDM25LYUU EASE SDM30LYUU EASE SDM35LYUU EASE SDM40LYUU EASE SDMF6Y EASE SDMF8Y EASE SDMF10Y EASE SDMF12Y EASE SDMF13Y EASE SDMF16Y EASE SDMF20Y EASE SDMF25Y EASE SDMF30Y EASE SDMF35Y EASE SDMF40Y EASE SDMF6LY EASE SDMF8LY EASE SDMF10LY EASE SDMF12LY EASE SDMF13LY EASE SDMF16LY EASE SDMF20LY EASE SDMF25LY EASE SDMF30LY EASE SDMF35LY EASE SDMF40LY EASE SDMF6YUU EASE SDMF8YUU EASE SDMF10YUU EASE SDMF12YUU EASE SDMF13YUU EASE SDMF16YUU EASE SDMF20YUU EASE SDMF25YUU EASE SDMF30YUU EASE SDMF35YUU EASE SDMF40YUU EASE SDMF6LYUU EASE SDMF8LYUU EASE SDMF10LYUU EASE SDMF12LYUU EASE SDMF13LYUU EASE SDMF16LYUU EASE SDMF20LYUU EASE SDMF25LYUU EASE SDMF30LYUU EASE SDMF35LYUU EASE SDMF40LYUU EASE SDMK6Y EASE SDMK8Y EASE SDMK10Y EASE SDMK12Y EASE SDMK13Y EASE SDMK16Y EASE SDMK20Y EASE SDMK25Y EASE SDMK30Y EASE SDMK35Y EASE SDMK40Y EASE SDMK6LY EASE SDMK8LY EASE SDMK10LY EASE SDMK12LY EASE SDMK13LY EASE SDMK16LY EASE SDMK20LY EASE SDMK25LY EASE SDMK30LY EASE SDMK35LY EASE SDMK40LY EASE SDMK6YUU EASE SDMK8YUU EASE SDMK10YUU EASE SDMK12YUU EASE SDMK13YUU EASE SDMK16YUU EASE SDMK20YUU EASE SDMK25YUU EASE SDMK30YUU EASE SDMK35YUU EASE SDMK40YUU EASE SDMK6LYUU EASE SDMK8LYUU EASE SDMK10LYUU EASE SDMK12LYUU EASE SDMK13LYUU EASE SDMK16LYUU EASE SDMK20LYUU EASE SDMK25LYUU EASE SDMK30LYUU EASE SDMK35LYUU EASE SDMK40LYUU EASE SDM6LY EASE SDM8LY EASE SDM10LY EASE SDM12LY EASE SDM13LY EASE SDM16LY EASE SDM20LY EASE SDM25LY EASE SDM30LY EASE SDM35LY EASE SDM40LY EASE SDE5 EASE SDE8 EASE SDE10 EASE SDE12 EASE SDE13 EASE SDE16 EASE SDE20 EASE SDE25 EASE SDE30 EASE SDE35 EASE SDE40 EASE SDE50 EASE SDE60 EASE SDE80 EASE SDE8AJ EASE SDE10AJ EASE SDE12AJ EASE SDE13AJ EASE SDE16AJ EASE SDE20AJ EASE SDE25AJ EASE SDE30AJ EASE SDE35AJ EASE SDE40AJ EASE SDE50AJ EASE SDE60AJ EASE SDE80AJ EASE SDM6Y EASE SDM6YUU EASE SDM8SY EASE SDM8Y EASE SDM8YUU EASE SDM10Y EASE SDM10YUU EASE SDM12OP EASE SDM12Y EASE SDM12YAJ EASE SDM12YUU EASE SDM13OP EASE SDM13Y EASE SDM13YAJ EASE SDM13YUU EASE SDM16OP EASE SDM16YAJ EASE SDM16YAJ EASE SDM16YUU EASE SDM20OP EASE SDM20Y EASE SDM20YAJ EASE SDM20YUU EASE SDM25OP EASE SDM25Y EASE SDM25YAJ EASE SDM25YUU EASE SDM30OP EASE SDM30Y EASE SDM30YAJ EASE SDM30YUU EASE SDM35OP EASE SDM35Y EASE SDM35YAJ EASE SDM35YUU EASE SDM38 EASE SDM38AJ EASE SDM38OP EASE SDM38YUU EASE SDM40OP EASE SDM40Y EASE SDM40YAJ EASE SDM40YUU EASE SDM50 EASE SDM50AJ EASE SDM50OP EASE SDM60 EASE SDM60AJ EASE SDM60OP EASE SDM80 EASE SDM80AJ EASE SDM80OP EASE SDM100 EASE SDM100AJ EASE SDM100OP EASE SDMF6UU EASE SDMF8UU EASE SDMF10UU EASE SDMF12UU EASE SDMF13UU EASE SDMF16TUU EASE SDMF16UU EASE SDMF20UU EASE SDMF25UU EASE SDMF30UU EASE SDMF35UU EASE SDMF40UU EASE SDMF50UU EASE SDMF60UU EASE SDMF80UU


EASE EASE-轴承持久， 准确的， 稳定的，可靠，经济。产品规格参数

EASE EASE-轴承持久， 准确的， 稳定的，可靠，经济。相关产品

上海川代轴承机械有限公司销售EASE EASE-轴承持久， 准确的， 稳定的，可靠，经济。直线 轴承。日本EASE品牌供应，专业为您提供高品质EASE全系列产品，能针对客户的需求提供EASE-轴承持久， 准确的， 稳定的，可靠，经济。相关技术服务，EASE产品规格参数及技术需求请直接联系我们，全国客服热线:021-52797858转8008询价，欢迎垂询。

相关推荐信息

超精加工对EASE直线轴承工作性能的影响


套圈滚动表面经超精加工后，直线轴承的工作性能在以下几个方面得到提高：
1.提高直线轴承的旋转精度、降低直线轴承的振动和噪声  试验研究已证实，轴承旋转精度的提高、振动和 噪声的降低均与...

EASE直线轴承具体的保养步骤


保养直线轴承有什么具体的做法，经过多年实践后与大家分享下我们的一些做法:
1.先拆下轮子，记得将螺丝收好，掉了就麻烦！
2.取下EASE直线轴承。 有的轮子的core很紧，直线轴承...

EASE EASE-轴承持久， 准确的， 稳定的，可靠，经济。轴承产品图片

EASE EASE-轴承持久， 准确的， 稳定的，可靠，经济。产品图片
近期推荐产品
上一个：这是EASE系列的第一个产品
下一个：EASE系列SDM8、SDM6、SDM10、SDM12、SDM13、SDM16、SDM20 SDM25、SDM30、SDM35、SDM40、SDM38 直线轴承
关于EASE EASE-轴承持久， 准确的， 稳定的，可靠，经济。直线轴承的需求及相关技术信息
请直接联系我们-日本EASE品牌专业供应商：
电话：021-52797858转8008询价
传真：021-51611236
邮箱：zzs@chuandaizc.com 　ass1318@hotmail.com
网址：WWW.EASE-CN.COM